LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005

5

POST OFFICE BOX 655303

LM2902

ALL OTHER

DEVICES

UNIT

Supply voltage, VCC (see Note 1)

±13 or 26

±16 or 32

V

Differential input voltage, VID (see Note 2)

±26

±32

V

Input voltage, VI (either input)

−0.3 to 26

−0.3 to 32

V

Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,

VCC ≤ 15 V (see Note 3)

Unlimited

Unlimited

D package

86

86

DB package

96

96

Package thermal impedance,

θJA (see Notes 4 and 5)

N package

80

80

°C/W

Package thermal impedance,

θJA (see Notes 4 and 5)

NS package

76

76

C/W

PW package

113

113

FK package

5.61

Package thermal impedance,

qJC (see Notes 6 and 7)

J package

15.05

°C/W

Package thermal impedance,

qJC (see Notes 6 and 7)

W package

14.65

C/W

Operating virtual junction temperature, TJ

150

150

°C

Case temperature for 60 seconds

FK package

260

°C

Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds

J or W package

300

300

°C

Storage temperature range, Tstg

−65 to 150

−65 to 150

°C

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.

2. Differential voltages are at IN+, with respect to IN−.

3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

4. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

5. The package thermal impedance is calculated in accordance with JESD 51-7.

6. Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ(max) − TC)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

7. The package thermal impedance is calculated in accordance with MIL-STD-883.

ESD protection

TEST CONDITIONS

TYP

UNIT

Human-Body Model

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

±2

kV