Data Sheet

E2 Sanitary Pressure Transducer

of 6

3

All specifications are subject to change without notice. All sales subject to standard terms and conditions.

Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The following non-Ashcroft trademarks are

the property of their respective owners: 17-4PH®, AMP®, Deutsch®, Hirschmann®, Metri-Pack®, Neobee®,

Superseal® and Tri-Clamp®. For more information, see Ashcroft Brands & Trademarks

©2024 Ashcroft Inc. e2_san_seal_trans_ds_RevG_10-24-24

ashcroft.com

| 1.800.328.8258 | Contact Us

ORDERING CODE

Example:

E2G

A

5

C

S15

42

CC

X

10

F

100# -XNH

Model

E2G - Sanitary Pressure Transducer

E2G

Sensor Materials - See Table 2 on page 4 for range options

A - 17-4PH® Stainless steel

A

C - 316L Stainless steel (liquid isolated)

Accuracy

3 - ±0.25% span

5 - ±0.50% span

5

7 - ±1.00% span

Calibration Chart

N - Without calibration chart

C - With Traceable calibration certificate

C

Pressure Connections - See Table 3 on page 4 for dimensional information

S15 - 1.5˝ Tri-Clamp®

S15

S20 - 2.0˝ Tri-Clamp®

Output Type - Note: Consult factory for additional outputs

05 - 0-5 Vdc (Not available with X1L variation)

10 - 0-10 Vdc (Not available with X1L variation)

11 - 1-11 Vdc

12 - 1-10 Vdc

15 - 1-5 Vdc

16 - 1-6 Vdc

42 - 4-20 mA

42

45 - 0.5-4.5 Vdc non-ratiometric

00 - Custom

Electrical Terminations - See Table 4 on page 5 for more options

CC - (½ NPT conduit w/cable)

CC

Mating Connector

M - With mating connector

X - Without mating connector

X

Cable Length

Max cable length of 30 ft for outputs 05, 10, 11, 12, 13, 15, 16 and 45. Max cable length of 99 ft for outputs 24 and 42.

00 - No cable

XX - 01 to 99

10

Unit of Length

F - Feet

F

M - Meter

N - Inches

0 - No cable

Pressure Ranges - Coding example only, see Table 5 on page 6 for more options

100# - 100 psig

100#

Options (if choosing an option(s) must include an “X”)

-X__

NN - Paper tag

NH - Stainless steel tag

NH

CZ - Silicone fill fluid (3-A certified)

MY - Light mineral oil fill fluid (3-A certified)

NM - Neobee® M20 fill fluid (3-A certified)

FJ - Distilled water fill fluid (3-A certified)

1L - SIL certification for E2 series transducer

Accessory

Part Number

Offset and Span Adjustment Magnet

266A143-01

Accessories must be ordered separately