ST10F272 datasheet(89/179 Pages) STMICROELECTRONICS

tên linh kiện	ST10F272

Giải thích chi tiết về linh kiện	16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM

PDF	179 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

89 / 179 page

ST10F272

System reset

89/179

Figure 21.

Synchronous short / long hardware RESET (EA = 1)

P0[15:13]

not transparent

RSTF

P0[12:2]

transparent

not t.

P0[1:0]

not t.

not transparent

FLARST

RST

≤ 1 ms

1024 TCL

≤ 2 TCL

2) V

RPD > 2.5V Asynchronous Reset not entered

200

µA Discharge

RPD

RSTOUT

At this time RSTF is sampled HIGH or LOW

so it is SHORT or LONG reset

(After Filter)

RSTIN

< 1032 TCL

≤4 TCL4)

≤12 TCL

≤ 500 ns

≥ 50 ns

≤ 500 ns

≥ 50 ns

≤ 500 ns

≥ 50 ns

IBUS-CS

7 TCL

1. RSTIN assertion can be released there. Refer also to Section 21.1 for details on minimum pulse duration.

2. If during the reset condition (RSTIN low), RPD voltage drops below the threshold voltage (about 2.5V for 5V operation),

the asynchronous reset is then immediately entered.

3. RSTIN pin is pulled low if bit BDRSTEN (bit 3 of SYSCON register) was previously set by software.

Bit BDRSTEN is cleared after reset.

4. Minimum RSTIN low pulse duration shall also be longer than 500ns to guarantee the pulse is not masked by the

internal filter (refer to Section 21.1).

Notes:

(Internal)

8 TCL

not t.

ST10F272 bảng dữ liệu(PDF) 89 Page - STMicroelectronics

ST10F272 bảng dữ liệu(HTML) 89 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL