DIMENSIONS in [ ] are millimeters

For reference only, consult Ashcroft for specific dimensional drawings

HOW TO ORDER S70 TEMPERATURE PROBES:

The ordering code is built by selecting the appropriate

configuration for the various sections of the ordering code.

The Insert nominal length LN is measured from base of

the head to the tip of the probe.

The lag extension length N is measured for the base of the

head to the center of the threads on the lag extension.

The B dimension is from the center of the connection fitting

to the end of the expansion loop.

The A dimension is from the end of the expansion loop to the

tip of the probe.

LN = A + B + N + length of connection fitting

The B length and the LN length are added to the end of the

ordering code in millimeters.

To convert inches to millimeters multiply by 25.4.

mm = inches x 25.4

e = Stem Diameter

T = Lag Extension Length

LN = Nominal Length

B = Length to Expansion Loop

A = Length to Weld Pad

Expansion Loop

Data Sheet

S70 Tube Skin Thermocouples

of 5

4

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2022 Ashcroft Inc. S70_Thermo_ds_RevA_03-22-22

ashcroft.com

info@ashcroft.com

1.800.328.8258

of 5

5

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2022 Ashcroft Inc. S70_Thermo_ds_RevA_03-22-22

ashcroft.com

info@ashcroft.com

1.800.328.8258