LM392

Low Power Operational Amplifier/Voltage Comparator

General Description

The LM392 series consists of 2 independent building block

circuits. One is a high gain, internally frequency compen-

sated operational amplifier, and the other is a precision

voltage comparator. Both the operational amplifier and the

voltage comparator have been specifically designed to op-

erate from a single power supply over a wide range of

voltages. Both circuits have input stages which will common-

mode input down to ground when operating from a single

power supply. Operation from split power supplies is also

possible and the low power supply current is independent of

the magnitude of the supply voltage.

Application areas include transducer amplifier with pulse

shaper, DC gain block with level detector, VCO, as well as all

conventional operational amplifier or voltage comparator cir-

cuits. Both circuits can be operated directly from the stan-

dard 5 V

DC power supply voltage used in digital systems,

and the output of the comparator will interface directly with

either TTL or CMOS logic. In addition, the low power drain

makes the LM392 extremely useful in the design of portable

equipment.

Advantages

n

Eliminates need for dual power supplies

n

An internally compensated op amp and a precision

comparator in the same package

n

Allows sensing at or near ground

n

Power drain suitable for battery operation

n

Pin-out is the same as both the LM358 dual op amp and

the LM393 dual comparator

Features

n

Wide power supply voltage range

Single supply:

3V to 32V

Dual supply:

±1.5V to ±16V

n

Low supply current drain — essentially independent of

supply voltage:

600 µA

n

Low input biasing current:

50 nA

n

Low input offset voltage:

2 mV

n

Low input offset current:

5 nA

n

Input common-mode voltage range includes ground

n

Differential input voltage range equal to the power

supply voltage

ADDITIONAL OP AMP FEATURES

n

Internally frequency compensated for unity gain

n

Large DC voltage gain:

100 dB

n

Wide bandwidth (unity gain):

1 MHz

n

Large output voltage swing:

0V to V

+ − 1.5V

ADDITIONAL COMPARATOR FEATURES

n

Low output saturation voltage:

250 mV at 4 mA

n

Output voltage compatible with all types of logic systems

Connection Diagram

(Amplifier A = Comparator)

(Amplifier B = Operational Amplifier)

Dual-In-Line Package

00779301

(Top View)

Order Number LM392M or LM392MX

See NS Package Number M08A

Order Number LM392N

See NS Package Number N08E