SN54ABT16853_07 datasheet(4/11 Pages) TI

4 / 11 page

SN54ABT16853, SN74ABT16853

DUAL 8-BIT TO 9-BIT PARITY BUS TRANSCEIVERS

SCBS153B – OCTOBER 1992 – REVISED JANUARY 1997

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

error-flag waveforms

ERR

CLR

OEA

OEB

Bi + PARITY

Even

Odd

Pass

Store

Sample

Clear

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage range, VCC

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (except I/O ports) (see Note 1)

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high or power-off state, VO

–0.5 V to 5.5 V

. . . . . . . . . . . . . . . . . . .

Current into any output in the low state, IO: SN54ABT16853

96 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SN74ABT16853

128 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0)

–18 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0)

–50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Note 2): DGG package

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DL package

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

2. The package thermal impedance is calculated in accordance with EIA/JEDEC Std JESD51.

SN54ABT16853 bảng dữ liệu(PDF) 4 Page - Texas Instruments

SN54ABT16853 bảng dữ liệu(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11

bảng dữ liệu tải về

Link URL