KIT-SEN-ACT datasheet(40/50 Pages) AGELECTRONICA

tên linh kiện	KIT-SEN-ACT

Giải thích chi tiết về linh kiện	Kit De Sensores Y Actuadores Compatibles Con Ardui

PDF	50 Pages

Scroll/Zoom	100%

nhà sản xuất	AGELECTRONICA [AG Electronica]

Trang chủ	https://www.agelectronica.com/

Logo

40 / 50 page

Descripción: Modulo con sensor magnético, deberá construirse un

circuito simple que contara con un LED que debe conectarse al PIN 13

del Arduino, cuando el sensor detecta un destello magnético el LED

encenderá, si el sensor no detecta nada el LED permanecerá apagado.

Especificaciones:

 Tipo: LED

 Modelo: YB-3120B4PnYG-PM

 Forma: LED de 5mm tipo DIP

 Colores: rosa, amarillo, verde (ultra brillante)

 Tipo de Lente: Niebla Blanca Voltaje :3.0 ~ 4 .5 V

Código:

/ * Blink

Turns on an LED on for two second, then off for two second, repeatedly.

This example code is in the public domain.

* /

void setup () {

/ / Initialize the digital pin as an output.

/ / Pin 13 has an LED connected on most Arduino boards: pinMode (13,

OUTPUT);

}

void loop () {

digitalWrite (13, HIGH); / / set the LED on

delay (2000); / / wait for a second

digitalWrite (13, LOW); / / set the LED off

delay (2000); / / wait for a second

}

Arduino KY-034: Modulo Flash Automático de 7

colores

KIT-SEN-ACT bảng dữ liệu(PDF) 40 Page - AG Electronica