STO-1920305-R-E1

www.eravant.com | 424-757-0168 | support@eravant.com

Copyright © 2024 by Eravant

3/3

Advanced Rev 1.0

Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters])

NOTE:

•

To complete a frequency extender test set, pair this Rx module with a compatible Tx/Ref or Tx/Rx module listed in

VNA Frequency Extenders page.

•

Eravant reserves the right to change the information presented without notice.

CAUTION:

•

Exceeding absolute maximum ratings shown will damage the extenders.

•

Any foreign objects in the waveguide will cause performance degradation or damage the device.

•

For 1.35 mm, 1.85 mm, 2.4 mm, 2.92 mm, and SMA connectors proper torque should be applied: 8.0 ± 0.15 inch-

pounds (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.