Advanced 1.4

STO-0509300-R-E1

G-Band VNA Frequency Extender

Receive (Rx) Module, 6.25 to 9.17 GHz Input

STO-0509300-R-E1 is a compact G-Band vector network

analyzer (VNA) frequency extender receive (Rx) module that

extends lower frequency VNA signals to 150 to 220 GHz. It

is compatible with modern vector network analyzers such as

Rohde & Schwarz ZNA, Anritsu VectorStar™, Keysight PNA-X

Series, and Copper Mountain CobaltFx. The VNA needs dual

sources to be extended. This frequency extender can be used

to measure one-path transmission (S21 or S12) through DUT

when paired with compatible transmitter. When Rx module is

paired with Tx/Rx module, the setup can be used to measure

reflection at input of DUT and transmission through DUT. An AC

to DC Power adapter and

Proxi-Flange™ Contactless Flanges

(STQ-WG-05010-FB-CF and STQ-WG-05025-FB-CF), are

included. The Eravant calibration kit (

STQ-TO-05-S1-CKIT1)

and

Wave-Glide™ Rail System (STQ-TL-RW-S10-M1) are

highly recommended to complete the G-Band VNA test set. VNA

extender is packaged individually in a rugged equipment box

with additional hardware and tools.

Parameter

Minimum

Typical

Maximum

Frequency Range

150 GHz

220 GHz

Input Attenuation Control Range

30 dB

Test Port Input Power (Damage)*

+10 dBm

Dynamic Range** @ 10 Hz BW

90 dB

Test Port Match

20 dB

LO Source Input Frequency (RF±IF)

6.25 GHz

9.17 GHz

LO Source Input Power

-3 dBm

0 dBm

+3 dBm

IF Frequency Range

10 MHz

1000 MHz

Multiplication Factor

24

Specification Temperature

+20 ˚C

+30 ˚C

Operating Temperature

0 ˚C

+50 ˚C

Electrical Specifications

ECCN

• 3A001.b.7

FEATURES

• Full Band Coverage

• Dynamic Range of 90 dB

• AC Power Input: 100 to 240 VAC

APPLICATIONS

• VNA Frequency Extension

• OTA Measurements

• Test Lab Instrumentation

RECOMMENDED PAIRINGS

• Cal Kit: STQ-TO-05-S1-CKIT1

• Waveguide Quick Connects

• Cable: SCW-SMSM040-F1-A-PM

RECOMMENDED RESOURCES

• Contactless WG Flange & mmW-

THz Test Setup Applications

• VNA Extender Configuration Guide

• VNA Extenders & Cal Kits

*Max input power is specified when attenuation level is minimum. Increasing

attenuation level will increase power handling.

**Measured with compatible Tx/Ref or Tx/Rx module.

www.eravant.com | 424-757-0168 | support@eravant.com

1/3

Copyright © 2023 by Eravant