AMC7585

Copyright

5

DD041_G

--

OCTOBER 2007

ELECTRICAL CHARACTERISTICS

range, and are for DC characteristics only. (Low duty cycle pulse testing techniques are used which maintains

junction and case temperatures equal to the ambient temperature.)

AMC7585

Parameter

Symbol

Test Conditions

Min.

Typ.

Max.

Units

AMC7585-2.5

2.475

2.500

2.525

AMC7585-3.3

3.267

3.300

3.333

Output Voltage

AMC7585-5.0

4.950

5.000

5.050

V

AMC7585-2.5

2.450

2.500

2.550

AMC7585-3.3

3.234

3.300

3.366

Output Voltage

AMC7585-5.0

4.900

5.000

5.100

V

(Note 1)

1.238

1.250

1.262

Reference

Voltage

AMC7585-ADJ

1.230

1.250

1.270

V

≤ 7V

0.04

0.2

%

0.2

0.4

%

Dropout Voltage

ΔV

1.30

1.50

V

Quiescent Current

( for AMC7585-X.X)

8

13

mA

Adjust Pin Current

( for AMC7585-ADJ)

50

120

µA

Current Limit

5.1

6.8

A

Imin

5

10

mA

60

80

dB

Note 1

Output voltage is set to be 2.5V.

Note 2:

Line and load regulations are guaranteed up to maximum power dissipation determined by input/output differential and the output current.

However, the maximum power will not be available over the full input/output voltage range.

Note 3:

The specifications represent the minimum input/output voltage required to maintain 1% regulation.

Note 4:

The minimum load current is the minimum current required to maintain regulation. Normally the current in the resistor divider used to set

the output voltage is selected to meet the minimum load current requirement.

Note 5:

These parameters, although guaranteed, are not tested in production prior to shipment