UCS1002-3 datasheet(30/114 Pages) MICROCHIP

tên linh kiện	UCS1002-3

Giải thích chi tiết về linh kiện	Programmable USB Port Power Controller with Charger Emulation

PDF	114 Pages

Scroll/Zoom	100%

nhà sản xuất	MICROCHIP [Microchip Technology]

Trang chủ	http://www.microchip.com

Logo

30 / 114 page

UCS1002-3

DS20006852A-page 30

 2023 Microchip Technology Inc. and its subsidiaries

6.0

USB HIGH-SPEED DATA

SWITCH

The UCS1002-3 contains a series USB 2.0-compliant

high-speed switch between the DPIN and DMIN pins

and between the DPOUT and DMOUT pins. This

switch is designed for high-speed, low-latency

functionality to enable USB 2.0 full-speed and high-

speed communications with minimal interference.

Nominally, the switch is closed in the Active state,

enabling uninterrupted USB communications between

the upstream host and the portable device. The switch

is opened when:

• The UCS1002-3 is actively emulating using any of

the charger emulation profiles except CDP (by

default - see Section 10.4.5 “High-Speed

Switch Configuration Register”).

• The UCS1002-3 is operating as a dedicated

charger unless the HSW_DCE configuration bit is

set (see Section 10.4.5 “High-Speed Switch

Configuration Register”).

• The UCS1002-3 is in the Detect state (by default)

or in the Sleep state.

6.1

USB-IF High-Speed Compliance

The USB data switch does not significantly degrade the

signal integrity through the device DP/DM pins with

USB high-speed communications.

Note:

If the VDD voltage is less than VDD_TH,

the high-speed data switch is disabled

and opened.

UCS1002-3 bảng dữ liệu(PDF) 30 Page - Microchip Technology