16 / 21 page
STAR1000
Document Number: 38-05714 Rev. *B
Page 16 of 21
Packaging and Geometrical Constraints
Package Drawing
The detector is packaged in an 84-pin J-leaded package.
The detector is mounted into position with thermally and
electrically conductive adhesive. The bottom plate of the cavity
is electrically connected to a ground pin.
The detector is positioned into the cavity such that the optical
center of the detector coincides with the geometrical center of
the cavity within a tolerance of ± 50
µm in X- and Y direction.
The tolerance on the parallelism of the detector is ± 50
µm in
X- and Y- direction.
Note: The dimensions in Figure 8.are in inches.
Figure 8. Package Drawing
[+] Feedback
[+] Feedback
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
