Capacitive Sensors

BCS R08RRE-PSMFHC-EP02

Order Code: BCS012H

Internet

www.balluff.com

eCl@ss 9.1: 27-27-01-02

Subject to change without notice: 244535

ETIM 6.0: EC002715

BCS012H_4_2023-08-29

2 / 2

Material

Cover material

PP

Housing material

PP

Material jacket

PUR

Material sensing surface

PP

Mechanical data

Dimension

34 x 16 x 8 mm

Installation

flush with container outer wall

Size

Block style

Tightening torque

0.2 Nm

Remarks

Note for using in standard applications with aqueous media: The Smart Level sensors are factory adjusted for standard applications. With this setting the

Smart Level sensors can be used without further adjustment for detecting aqueous media through glass or plastic walls. The factory setting can

automatically mask glass or plastic walls (approx. 0.5 mm to 6 mm) and compensate for foam, moisture and dirt buildup inside and outside the container.

Special applications: The Smart Level sensors can also be used with aqueous media in previously unsolvable and critical applications such as through glass

or plastic walls thicker than 6 mm. Here the user can change the factory setting.

For full calibration connect input DI to L+ for 2...7 seconds. For empty calibration connect to L+ for 7..12 seconds.

Input DI can be used for teaching the switching point. In normal operation input DI should be connected continuously to L-.

For more information about MTTF and B10d see MTTF / B10d Certificate

Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no

warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.

Wiring Diagrams (Schematic)

Help Views