29 / 46 page

Rev: 13 September 2005
Class 2 Bluetooth module - F2M03C2
Datasheet
6.3
Serial Peripheral Interface
F2M03 is a slave device that uses terminals SPI_MOSI, SPI_MISO, SPI_CLK and SPI_CSB. This interface
is used for program emulation/debug and IC test. It is also the means by which the F2M03 flash may be
programmed, before any 'boot' program is loaded.
Note:
The designer should be aware that no security protection is built into the hardware or firmware associated with this port,
so the terminals should not be permanently connected in a PC application. This interface is not a user interface and
only used for initial download and configuration by Free2move.
© 2003 Free2move AB
Page 29(46)