DSPIC30F2011 datasheet(16/205 Pages) MICROCHIP

16 / 205 page

PIC30F2011/2012/3012/3013

DS70139E-page 14

Table 1-1 provides a brief description of device I/O

pinouts and the functions that may be multiplexed to a

port pin. Multiple functions may exist on one port pin.

When multiplexing occurs, the peripheral module’s

functional requirements may force an override of the

data direction of the port pin.

TABLE 1-1:

PINOUT I/O DESCRIPTIONS

Pin Name

Type

Buffer

Type

Description

AN0 - AN9

Analog

Analog input channels.

AVDD

Positive supply for analog module.

AVSS

Ground reference for analog module.

CLKI

CLKO

ST/CMOS

—

External clock source input. Always associated with OSC1 pin

function.

Oscillator crystal output. Connects to crystal or resonator in

Crystal Oscillator mode. Optionally functions as CLKO in RC

and EC modes. Always associated with OSC2 pin function.

CN0 - CN7

Input change notification inputs.

Can be software programmed for internal weak pull-ups on all

inputs.

EMUD

EMUC

EMUD1

EMUC1

EMUD2

EMUC2

EMUD3

EMUC3

I/O

ICD Primary Communication Channel data input/output pin.

ICD Primary Communication Channel clock input/output pin.

ICD Secondary Communication Channel data input/output pin.

ICD Secondary Communication Channel clock input/output pin.

ICD Tertiary Communication Channel data input/output pin.

ICD Tertiary Communication Channel clock input/output pin.

ICD Quaternary Communication Channel data input/output pin.

ICD Quaternary Communication Channel clock input/output pin.

IC1 - IC2

Capture inputs 1 through 2.

INT0

INT1

INT2

External interrupt 0.

External interrupt 1.

External interrupt 2.

LVDIN

Analog

Low-Voltage Detect Reference Voltage Input pin.

MCLR

I/P

Master Clear (Reset) input or programming voltage input. This

pin is an active-low Reset to the device.

OC1-OC2

OCFA

—

Compare outputs 1 through 2.

Compare Fault A input.

OSC1

OSC2

I/O

ST/CMOS

—

Oscillator crystal input. ST buffer when configured in RC mode;

CMOS otherwise.

Oscillator crystal output. Connects to crystal or resonator in

Crystal Oscillator mode. Optionally functions as CLKO in RC

and EC modes.

PGD

PGC

I/O

In-Circuit Serial Programming™ data input/output pin.

In-Circuit Serial Programming clock input pin.

RB0 - RB9

I/O

PORTB is a bidirectional I/O port.

RC13 - RC15

I/O

PORTC is a bidirectional I/O port.

RD0, RD8 - RD9

I/O

PORTD is a bidirectional I/O port.

RF2 - RF5

I/O

PORTF is a bidirectional I/O port.

SCK1

SDI1

SDO1

SS1

I/O

—

Synchronous serial clock input/output for SPI1.

SPI1 Data In.

SPI1 Data Out.

SPI1 Slave Synchronization.

Legend: CMOS =

CMOS compatible input or output

Analog =

Analog input

Schmitt Trigger input with CMOS levels

Output

Input

Power

DSPIC30F2011 bảng dữ liệu(PDF) 16 Page - Microchip Technology

DSPIC30F2011 bảng dữ liệu(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL