DSPIC33FJ64GP710 datasheet(7/10 Pages) MICROCHIP

tên linh kiện	DSPIC33FJ64GP710

Giải thích chi tiết về linh kiện	Silicon Errata

PDF	10 Pages

Scroll/Zoom	100%

nhà sản xuất	MICROCHIP [Microchip Technology]

Trang chủ	http://www.microchip.com

Logo

7 / 10 page

DS80279B-page 7

dsPIC33F

16. Module: INT0, ADC and Sleep/Idle Mode

ADC event triggers from the INT0 pin will not

wake-up the device from Sleep or Idle mode if the

SMPI bits are non-zero. This means that if the

ADC is configured to generate an interrupt after a

certain number of INT0 triggered conversions, the

ADC conversions will not be triggered and the

device will remain in Sleep. The ADC will perform

conversions and wake-up the device only if it is

configured to generate an interrupt after each INT0

triggered conversion (SMPI<3:0> = 0000).

Work around

None. If ADC event trigger from the INT0 pin is

required, initialize SMPI<3:0> to ‘0000’ (interrupt

on every conversion).

17. Module: Doze Mode and Traps

The address error trap, stack error trap, math error

trap and DMA error trap will not wake-up a device

from Doze mode.

Work around

None.

18. Module: JTAG Programming

JTAG programming does not work.

Work around

None.

DSPIC33FJ64GP710 bảng dữ liệu(PDF) 7 Page - Microchip Technology