công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

DS2430A/T bảng dữ liệu(PDF) 7 Page - Dallas Semiconductor

tên linh kiện DS2430A/T
Giải thích chi tiết về linh kiện  256-Bit 1-Wire EEPROM
PDF  16 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  DALLAS [Dallas Semiconductor]
Trang chủ  https://www.maximintegrated.com/en.html
Logo DALLAS - Dallas Semiconductor

DS2430A/T bảng dữ liệu(HTML) 7 Page - Dallas Semiconductor

Back Button DS2430A/T Datasheet HTML 3Page - Dallas Semiconductor DS2430A/T Datasheet HTML 4Page - Dallas Semiconductor DS2430A/T Datasheet HTML 5Page - Dallas Semiconductor DS2430A/T Datasheet HTML 6Page - Dallas Semiconductor DS2430A/T Datasheet HTML 7Page - Dallas Semiconductor DS2430A/T Datasheet HTML 8Page - Dallas Semiconductor DS2430A/T Datasheet HTML 9Page - Dallas Semiconductor DS2430A/T Datasheet HTML 10Page - Dallas Semiconductor DS2430A/T Datasheet HTML 11Page - Dallas Semiconductor Next Button
Zoom Inzoom in Zoom Outzoom out
 7 / 16 page
background image
DS2430A
7 of 16
MEMORY FUNCTION FLOW CHART Figure 6 (cont’d)
WRITE APPLICATION REGISTER [99h]
This command is essentially the same as the Write Scratchpad command, but it addresses the 64-bit
register scratchpad. After issuing the command code, the master must provide a 1-byte address, followed
by the data to be written. The DS2430A will automatically increment the address after every byte it
received. After having received a data byte for address 07h, the address counter will wrap around to 00h
for the next byte and writing continues until the master sends a Reset Pulse. The Write Application
Register command can be used as long as the application register has not yet been locked. If issued for a
device with the application register locked, the data written to the register scratchpad will be lost.
READ STATUS REGISTER [66h]
The status register is a means for the master to find out if the application register has been programmed
and locked. After issuing the read status register command, the master must provide the validation key
00h before receiving status information. The two least significant bits of the 8-bit status register will be 0
if the application register was programmed and locked; all other bits will always read 1. The master may
finish the read status command by sending a Reset Pulse at any time.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com