WM22-DIN datasheet(9/10 Pages) ETC2

9 / 10 page

Specifications are subject to change without notice

WM22-DINDS1003

Keys for:

- value programming;

- function selection;

- displaying the measuring pages.

2. Display

LCD with alphanumeric indications to:

- display configuration parameters;

- display all the measured variables.

3. Removable label

Label to write the instrument ID number.

4. Hidden dip-switch

Enable/ disable the access to the

programming procedure.

Front panel description

1. Key-pad

To program configuration parameters and to display variables.

S-key to enter programming and confirm selections;

Wiring diagrams (optional modules)

Only open collector outputs: the grounds of the outputs are separated, and therefore it’s possible to carry out, for the same

module, two different connections. The load resistance (Rc) must be designed so that the closed contact current is lower than

100mA; the VDC voltage must be lower than or equal to 30V. VDC: power supply voltage output. Vo+: positive output contact

(open collector transistor). GND: ground output contact (open collector transistor).

Current and voltage

4-wire connection

2-wire connection

Open collector output

Fig.10

Analogue output

Fig. 12

RS485 Serial output

Fig. 13

RS485 Serial output

Fig. 14

WM22-DIN

VDC max 30V

Relay + open collector output Fig. 11

WM22-DIN bảng dữ liệu(PDF) 9 Page - List of Unclassifed Manufacturers