TDA3606AT datasheet(9/16 Pages) PHILIPS

9 / 16 page

1998 May 07

Philips Semiconductors

Product speciﬁcation

Multiple voltage regulator with battery

detection

TDA3606A

Fig.6 Curve for selecting the value of the output capacitor.

(1) Maximum ESR.

(2) Minimum ESR.

handbook, full pagewidth

0.68

(1)

(2)

output capacitor (

µF)

MBK118

stable region

100

1000

ESR

(

Ω)

APPLICATION CIRCUITS

In Fig.7 the quiescent current equals Iq +IRdivider.

The specified quiescent current equals Iq. When the

supply voltage is connected, the regulator will switch on

when the supply voltage exceeds 7.6 V. With the aid of a

timing capacitor at pin 6 the reset can be delayed (the

timer starts at the same moment as the regulator is

switched on).

Forced reset can be accomplished by short-circuiting the

timer capacitor by using the push button switch. When the

push button is released again, the timer restarts (only

when the regulator is on) causing a second reset on both

RES1 and RES2.

The maximum output current of the regulator equals:

When Tamb =85 °C, the maximum output current equals

138 mA. At lower ambient (Tamb < 0) temperature the

maximum output current equals 320 mA.

max

150

amb

–

th j-a

REG

–

()

-------------------------------------------------------

150

amb

–

()

------------------------------------ (mA)

TDA3606AT bảng dữ liệu(PDF) 9 Page - NXP Semiconductors

TDA3606AT bảng dữ liệu(HTML) 9 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

bảng dữ liệu tải về

Link URL