Figure 2. PI324MC-A4 Cross Section

I/O Designation

There are two connectors located at the ends of the modules. The outline of the module in

Figure 5 of the mechanical section illustrates these connector locations. With the module

window facing down on flat surface and with the viewer looking down on backside of the

module, the connectors are located on each end of the module with their pins pointing

toward the viewer. The connectors for section 1 has 12 pins and is located on the right

hand side. The part number is JAE IL-Z-12P-S125L3-E. Its pin numbers and

designations are in Table 1A. Pin Configuration For Section 1 Connector.

Pin Number

Symbol

Names and Functions

1

Vout1

Analog Video Output

2

Gnd

Ground; 0V

3

Vdd (+5V)

Positive power supply

4

Vn (-5V )

Negative power supply

5

Gnd

Ground; 0V

6

SP1

Shift register start pulse

7

Gnd

Ground; 0V

8

CP

Sampling clock pulse

9

GLED

Ground for the light source; 0V

10

VLED

Supply for the light source

11

LED(future)

Supply for future LED source

12

LED(future)

Supply for future LED source

Table 1A. Pin Configuration For Section 1 Connector

PAGE 3 OF 9 - PI324MC-A4, 11-15-00

GLASS WINDOW

DOCUMENT SURFACE

LIGHT PATH

SENSORS

PCB

LED

BAR

INSIDE PICTORIAL OF MODULE