SST26VF032B-104ISLASHSM datasheet(72/82 Pages) MICROCHIP

72 / 82 page

SST26VF032B/SST26VF032BA

DS20005218K-page 72

 2013-2022 Microchip Technology Inc. and its subsidiaries

23EH

A20:A16

06H

(4-4-4) SQI nB Burst with Wrap Number of Wait states (dummy

clocks) needed before valid output

00110b: 6 clocks of dummy cycle

A23:A21

(4-4-4) SQI nB Burst with Wrap Number of Mode Bits

000b: Set Mode bits are not supported

23FH

A31:A24

0CH

(4-4-4) SQI nB Burst with Wrap Opcode

240H

A4:A0

00H

(1-1-1) Read Memory Number of Wait states (dummy clocks) needed

before valid output

00000b: Wait states/dummy clocks are not supported.

A7:A5

(1-1-1) Read Memory Number of Mode Bits

000b: Mode bits are not supported,

241H

A15:A8

03H

(1-1-1) Read Memory Opcode

242H

A20:A16

08H

(1-1-1) Read Memory at Higher Speed Number of Wait states

(dummy clocks) needed before valid output

01000: 8 clocks (8 bits) of dummy cycle

A23:A21

(1-1-1) Read Memory at Higher Speed Number of Mode Bits

000b: Mode bits are not supported,

243H

A31:A24

0BH

(1-1-1) Read Memory at Higher Speed Opcode

244H

A7:A0

FFH

Reserved. Bits default to all 1’s.

245H

A15:A8

FFH

Reserved. Bits default to all 1’s.

246H

A23:A16

FFH

Reserved. Bits default to all 1’s.

247H

A31:A24

FFH

Reserved. Bits default to all 1’s.

Security ID

248H

A7:A0

FFH

Security ID size in bytes

Example: If the size is 2 Kbytes, this field would be 07FFH

249H

A15:A8

07H

24AH

A23:A16

FFH

Reserved. Bits default to all 1’s.

24BH

A31:A24

FFH

Reserved. Bits default to all 1’s.

Memory Organization/Block Protection Bit Mapping(1)

24CH

A7:A0

02H

Section 1: Sector Type Number:

Sector type in JEDEC Parameter Table (bottom, 8 KByte)

24DH

A15:A8

02H

Section 1 Number of Sectors

Four of 8KB block (2n)

24EH

A23:A16

FFH

Section 1 Block Protection Bit Start

((2m) +1)+ c, c=FFH or -1, m= 6 for 32 Mb

Address bits are Read Lock bit locations and Even Address bits are Write

Lock bit locations. The most significant (left-most) bit indicates the sign of

the integer; it is sometimes called the sign bit. If the sign bit is zero, then

the number is greater than or equal to zero, or positive. If the sign bit is

one then the number is less than zero or negative.

TABLE 11-1:

SERIAL FLASH DISCOVERABLE PARAMETER (SFDP) (CONTINUED)

Address

Bit Address

Data

Comments

Security ID Range

Unique ID

(Preprogrammed at factory)

0000H - 0007H

User Programmable

0008H - 07FFH

SST26VF032B-104I/SM bảng dữ liệu(PDF) 72 Page - Microchip Technology

SST26VF032B-104I/SM bảng dữ liệu(HTML) 72 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

bảng dữ liệu tải về

Link URL