Digital Attenuator, 1-Bit, 10 dB Step

DC - 2.0 GHz

MAATSS0018

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V2

2

RoHS

Compliant

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

0 - 1 GHz

1 - 2 GHz

dB

dB

—

—

0.3

0.5

0.45

0.7

Attenuation

DC - 2 GHz

dB

9.5

10

10.5

VSWR

0 - 2 GHz

Ratio

—

1.4:1

—

2 Tone @ 0 dBm, 5 MHz spacing

dBm

—

50

—

P1dB

1 GHz

dBm

—

28

—

Trise, Tfall

10% to 90% RF, 90% to 10% RF

nS

—

5

—

Ton, Toff

50% Control to 90% RF, 50% Control to 10% RF

nS

—

10

—

Transients

In Band

mV

—

6

—

Control Current

│Vc│ = 3 V

µA

—

25

—

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

†

Reference Application Note M538 for lead-free solder reflow recommendations.