M402 datasheet(39/89 Pages) BK

39 / 89 page

16. Calculation Function <CALC>

When

is pushed, the following function menu is displayed.

* By pushing

, the sweep is restarted.

* By pushing

, the calculation function is selected.

By rotating

, the number of times of the sweep can be set.

16.1 NORMAL Mode

1. When

is pushed, the normal mode is set. The calculation is not performed in this mode. The

number of times of the sweep is infinite. This mode is normally used.

* When this mode is set, “NORMAL” is displayed in the CALC area on the screen.

(Refer to “4. Explanation of Screen” for the details.)

16.2 MAX HOLD Mode

1. By the operation of

, the number of times of the sweep in the MAX HOLD mode

is set.

2. The update spectrum data is compared with the data left last time at each point, and the larger one is retained

and displayed.

128

256

512

1024

* *

(infinite)

* When this mode is set, “MAX --- (number of times)” is displayed in the CALC area on the screen.

(Refer to “4. Explanation of Screen” for the details.)

16.3 MIN HOLD Mode

1. By the operation of

, the number of times of the sweep in the MIN HOLD mode

is set.

MINHLD

* *

AVG

OVRWR

* *

SPRIFR

OFF

NORMAL

MAXHLD

* *

CALC

HOLD / RUN

M402 bảng dữ liệu(PDF) 39 Page - B&K Precision Corporation

M402 bảng dữ liệu(HTML) 39 Page - B&K Precision Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

bảng dữ liệu tải về

Link URL