1. Recognized by UL1577 (Double protection isolation),

file No. E64380 (as model No. PC817)

2. Package resin : UL flammability grade (94V-0)

■ Features

■ Agency approvals/Compliance

1. I/O isolation for MCUs (Micro Controller Units)

2. Noise suppression in switching circuits

3. Signal transmission between circuits of different po-

tentials and impedances

■ Applications

DIP 16pin (4-channel)

General Purpose

Photocoupler

1. 16pin DIP 4-channnel package

2. Double transfer mold package (ldeal for Flow Solder-

ing)

3. High collector-emitter voltage (VCEO : 80V(*))

4. Current transfer ratio (CTR : MIN. 50% at IF=5mA,

VCE=5V)

5. Several CTR ranks available

6. High isolation voltage between input and output

(Viso(rms) : 5.0kV)

(*) Up to Date code "P7" (July 2002) VCEO : 35V.

From the production Date code "J5" (May 1997) to "P7" (July

2002), however the products were screened by BVCEO≥70V.

■ Description

PC847X Series contains an IRED optically coupled

to a phototransistor.

It is packaged in a 4-channel package, available in

SMT gullwing lead-form option.

Input-output isolation voltage(rms) is 5.0kV.

Collector-emitter voltage is 80V and CTR is 50% to

600% at input current of 5mA.

1

Sheet No.: D2-A03201EN

Date Sep. 30. 2003

© SHARP Corporation

Notice The content of data sheet is subject to change without prior notice.

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

PC847X Series

∗1-channel package type is also available.

(model No. PC817X Series)

PC847X Series