Analog Power

AMT4100N

Parameter

Symbol

Test Conditions

Min

Typ

Max

Unit

Gate-Source Threshold Voltage

VGS(th)

VDS = VGS, ID = 250 uA

1

V

Gate-Body Leakage

IGSS

VDS = 0 V, VGS = ±20 V

±100

nA

VDS = 80 V, VGS = 0 V

1

VDS = 80 V, VGS = 0 V, TJ = 55°C

10

On-State Drain Current

a

ID(on)

VDS = 5 V, VGS = 10 V

3.9

A

Drain-Source On-Resistance

a

rDS(on)

VGS = 10 V, ID = 2.1 A

210

mΩ

Forward Transconductance

a

gfs

VDS = 15 V, ID = 2.1 A

5

S

Diode Forward Voltage

a

VSD

IS = 1.3 A, VGS = 0 V

0.79

V

Total Gate Charge

Qg

8.5

Gate-Source Charge

Qgs

1.8

Gate-Drain Charge

Qgd

2.9

Turn-On Delay Time

td(on)

5

Rise Time

tr

4

Turn-Off Delay Time

td(off)

12

Fall Time

tf

3

Input Capacitance

Ciss

278

Output Capacitance

Coss

32

Reverse Transfer Capacitance

Crss

23

Notes

a.

Pulse test: PW <= 300us duty cycle <= 2%.

b.

Guaranteed by design, not subject to production testing.

Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty,

representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out

of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special,

consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary

in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each

customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL

products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other

applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation

where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application,

Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,

damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated

with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part.

APL is an Equal Opportunity/Affirmative Action Employer.

pF

VDS = 15 V, VGS = 0 V, f = 1 Mhz

nC

VDS = 50 V, RL = 23.9 Ω,

ID = 2.1 A,

VGEN = 10 V, RGEN = 6 Ω

VDS = 50 V, VGS = 10 V,

ID = 2.1 A

Zero Gate Voltage Drain Current

Static

uA

Electrical Characteristics

IDSS

Dynamic

b

ns

© Preliminary

2

Publication Order Number:

DS_AMT4100N_1A