MCR03

Resistors

Rev.D

1/5

Thick film rectangular resistors

MCR03 (0603 size

)

Features

1) Power rating of 1 / 10W

2) Highly reliable chip resistor

Ruthenium oxide dielectric offers superior resistance to the elements.

3) Electrodes not corroded by soldering

Thick film makes the electrodes very strong.

4) Resin protective coating for FX, D resistors

Absorbs impact, facilitates mounting.

5) ROHM resistors have approved ISO–9001 certification.

Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the

product before using or ordering it.

Ratings

0.10W (1 / 10W)

−55°C to +155°C

at 70

°C

Item

Conditions

Specifications

Rated power

Rated voltage

Operating temperature

Nominal resistance

See Table 1.

Limiting element voltage

50V

Power must be derated according to the power derating curve in

Figure 1 when ambient temperature exceeds 70

°C.

The voltage rating is calculated by the following equation.

If the value obtained exceeds the limiting element voltage,

the voltage rating is equal to the maximum operating voltage.

E: Rated voltage (V) P: Rated power (W)

R: Nominal resistance (

Ω)

E

= P×R

0

20

40

60

80

100

−55

0

70

100

155

AMBIENT TEMPERATURE (

°C)

Fig.1