SL2S3003TT datasheet(35/82 Pages) NXP

35 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

8.5.2.3 LOCK BLOCK

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

If the addressed block is part of a write protected page, or if the block is protected with the read password

only (see Section 8.5.3.6 "PROTECT PAGE"), and the password has not been transmitted first with the SET

PASSWORD command, the label responds according to the error handling (see Section 8.6 "Error handling").

Note: Block 75 of the user memory is used for the 24-bit counter feature and must be used differently. Refer to

Section 8.5.3.25 "24-bit counter".

The ICODE 3 supports the option to lock larger sections of the user memory with the settings in the

configuration memory block 21 (see Table 9). The Lock Pointer LP_PNTR defines the block from which the

user memory is divided into two pages (Page L and Page H). The lock conditions for the two pages L and H are

defined with the settings defined in the LP_CTR byte (see Table 14).

8.5.2.4 READ MULTIPLE BLOCKS

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

If one of the addressed blocks is part of a page protected with the Read-Password, and if the password has not

been transmitted first with the SET PASSWORD command, the label responds according to the error handling

(see Section 8.6 "Error handling").

Note: Block 75 of the user memory is used for the 24-bit counter feature and must be used differently. Refer to

Section 8.5.3.25 "24-bit counter".

8.5.2.5 SELECT

As defined in ISO/IEC 15693-3.

8.5.2.6 RESET TO READY

As defined in ISO/IEC 15693-3.

Note: RESET TO READY also resets the label IC from the persistent quiet state to the READY state. Refer to

Section 8.5.3.10 "INVENTORY READ" and Section 8.5.3.19 "STAY QUIET PERSISTENT".

8.5.2.7 WRITE AFI

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

Note: The command can be password protected. Refer to Section 8.5.3.16 "PASSWORD PROTECT EAS/

AFI".

Note: You can use also the WRITE CONFIG command to block 17 of the configuration memory to write the

AFI. Refer to Table 9.

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

35 / 82

SL2S3003TT bảng dữ liệu(PDF) 35 Page - NXP Semiconductors

SL2S3003TT bảng dữ liệu(HTML) 35 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

bảng dữ liệu tải về

Link URL