TSL2585 datasheet(37/86 Pages) OSRAM

tên linh kiện	TSL2585

Giải thích chi tiết về linh kiện	Miniature Ambient Light Sensor with UV and Light Flicker Detection

PDF	86 Pages

Scroll/Zoom	100%

nhà sản xuất	OSRAM [OSRAM GmbH]

Trang chủ	http://www.osram.com

Logo

37 / 86 page

Page 36

Datasheet, Public

Document Feedback

[v4-00] 2022-Dec-22

TSL2585 − Register O ver view

Note(s):

1. Return to the Register Map (0xA2).

CFG2 Register

Figure 44:

CFG2

Note(s):

1. Return to the Register Map (0xA3).

DO_ALS_FINAL_

PROCESSING

0R/W

If this bit is set to “1” and flicker measurement takes

longer than ALS measurement, ALS measurement

writings are postponed until flicker measurement is

finished. Otherwise ALS data is not written to FIFO.

1:0

Reserved

Addr: 0xA3

CFG2

Bit

Field

Reset

Type

Bit Description

7AINT_DIRECT

R/W

ALS Interrupt Direct. Enables the direct mode of

ALS interrupt. ALS interrupts are only generated

when ALS_DATA (selected by ALS_THRESHOLD_

CHANNEL) moves over the hysteresis edges (AINT_

AILT and AINT_AIHT). If bit is “0”, interrupts are

always generated if ALS_DATA is above AIHT or

below AILT. The status of the ALS interrupt is directly

output on the INT or GPIO pin if this mode is enabled

and either of those pins are configured to do so

according to the INT_PINMAP and VSYNC_GPIO_

PINMAP settings.

6:1

Reserved

0FIFO_THR[0]

R/W

FIFO threshold LSB.

Please see FIFO_THR for information.

Addr: 0xA2

CFG1

Bit

Field

Reset

Type

Bit Description

TSL2585 bảng dữ liệu(PDF) 37 Page - OSRAM GmbH

TSL2585 bảng dữ liệu(HTML) 37 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

bảng dữ liệu tải về

Link URL