Type 8690

5 | 13

Visit product website 

2.

Approvals and conformities

2.1. General notes

• The approvals and conformities listed below must be stated when making enquiries. This is the only way to ensure that the product

complies with all required specifications.

• Not all available versions can be supplied with the below mentioned approvals or conformities.

2.2. Conformity

In accordance with the Declaration of Conformity, the product is compliant with the EU Directives.

2.3. Standards

The applied standards which are used to demonstrate compliance with the EU Directives are listed in the EU-Type Examination Certificate

and/or the EU Declaration of Conformity.

2.4. Explosion protection

Approval

Description

Optional: Explosion protection

ATEX:

BVS 14 ATEX E 008 X

II 3G Ex ec IIC T4 Gc

II 3D Ex tc IIIC T135 °C Dc

BVS 14 ATEX E052 X

II 2G Ex ia IIC T* Gb

II 2D Ex ia IIIC T135 °C Db

IECEx:

IECEx BVS 14.0009 X

Ex tc IIIC T135 °C Dc

Ex ec IIC T4 Gc

IECEx BVS 14.0035 X

Ex ia IIIC T135 °C Db

Ex ia IIC T* Gb

2.5. North America (USA/Canada)

Approval

Description

Optional: UL Listed for the USA and Canada

The products are UL Listed for the USA and Canada according to:

• UL 61010-1 (ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE – Part 1:

General Requirements)

• CAN/CSA-C22.2 No. 61010-1

Approval

Description

Optional: FM (Factory Mutual) – Explosion Protection

Increased Safety for Class I, Zone 2, AEx ec IIC T4 Gc hazardous (classified) locations, indoors and outdoors

(IP54). Alternatively marked as Class I Division 2 Groups A, B, C, and D; T4.