Page 2

www.sensata.com

Copyright © 2020 Sensata Technologies, Inc.

SINGLE POLE (ONE HANDLE)

1.260

[32.00]

.640 MAX.

[16.26]

2X 6-32 THREAD

.165 MAX.

[4.19]

.535

[13.59]

1.654

[42.01]

.982

[24.94]

O

N

O

F

F

1.732

[43.99]

.098

[2.49]

60

1.988 MAX.

[50.50]

.635

[16.13]

LINE

.228

[5.79]

.787

[19.99]

1.260

[32.00]

.551

[14.00]

2X .157

[3.99]

Mounting Detail

Notes:

1. Tolerance ± .015 [.38] unless noted. Dimensions in brackets [ ] are millimeters.

2. Main circuit breaker terminals are stationary male push-on type: .248 [6.30]

wide x .031 [.787] thick x .474 [12.00] long, or screw type: M4 x .354 [8.99]

wide x .031 [.787] thick x .474 [12.00] long.

Construction

Series and series with auxiliary switch available in various delays and combinations.

Auxiliary and Alarm Switch

When supplied shall be S.P.D.T. configuration with a maximum rating of 3.0 amperes, 250Vac resistive load. Gold contacts are rated at .100 amperes,

125Vac resistive load.

Moisture Resistance

Meet all the requirements of MIL-PRF-55629 when tested in accordance with Method 106 of MIL-STD-202.

Salt Spray (Corrosion)

Meet the requirements of MIL-PRF-55629 when tested in accordance with Method 101 of MIL-STD-202.

Shock

Circuit protectors shall not trip when tested per MIL-STD-202, Method 213, Test Condition B with 100% rated current applied to delayed units and 80%

rated current to instantaneous units. Units with auxiliary switches will withstand 30G max.

Vibration

Circuit protectors shall not trip when vibrated per MIL-STD-202, Method 201, Test Condition A with 100% rated current applied to delayed units and 80%

rated current to instantaneous units.

Recommended Torque Specifications

Component

Torque (in-lbs)

6-32 Mounting Inserts

6 to 8

M3 Mounting Screws

4 to 5

M4 Terminal Screws

10 to 12

Approximate Weight Per Pole

Ounces

Grams

1.7

48

Inrush Pulse Tolerance

Delay

Pulse Tolerance

61, 62, 600

8 times rated current

61F, 62F, 600F

12 times rated current

Where applicable, mechanical support must be provide to the

terminals when applying torque

Comparison of inrush pulse tolerance is with and without the inertia

delay feature for each of the 50/60 Hz delays. Pulse tolerance is

defined as a single pulse of half sine wave peak current amplitude of

8 milliseconds duration that will not trip the circuit protector