Type 8692

3 | 17

Visit product website 

1.

General technical data

Product properties

Dimensions

Further information can be found in chapter “4. Dimensions” on page 6.

Material

Body

PPS, stainless steel

Seal

EPDM

Cover

PC

Operation

Display

Graphic display with backlighting and intuitive menu navigation

Operating keys

Membrane keypad with 4 keys

Service interface

Connected to PC via USB connection

Configuration tool

Bürkert Communicator

PACTware (only for device versions with PROFIBUS, resp. analogue version with serial interface)

Commissioning

Initialisation positioner

Automatic by X.TUNE function (automatic adjustment of positioner)

Manual operation of pilot valve

In manual mode via push-button on control panel

Status display

Display of device and valve status

LEDs (colours according to NAMUR), only for Ethernet and büS versions

Communication

Fieldbus

EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1

Digital

Bürkert system bus (büS) (based on CANopen)

Performance data

Position sensor

Measuring principle

Inductive

Position detection module

Contactless analogue position sensor (wear-free)

Stroke range

Valve spindle

3…45 mm

Electrical data

Operating voltage

24 V DC ± 10 %

UL: NEC Class 2

Residual ripple

Max.10 %

Power consumption

< 5 W

Protection class

III according to DIN EN 61140 (VDE 0140 - 1)

Input /Output

Digital input

1 digital input, 0…5 V = log “0”, 10…30 V = log “1”

Digital output

2 digital outputs (optional), galvanically isolated

Current limitation

100 mA, in case of overload, the output is switched off and cyclically switched on again to check

for still existing overload.

Analogue output

1 output (optional)

0/4…20 mA, 0…5/10 V

Input data setpoint

Setpoint signal

Setpoint setting

0/4…20 mA and 0…5/10 V

Input resistance

0/4…20 mA, 180 Ω

0…5/10 V, 19 kΩ

Electrical connection

Multipole version

M12, 8-pin resp. 4-pin or 5-pin according to device version (see “5. Device/Process connec-

tions” on page 9)

Cable gland version

2x M16 × 1.5 (cable Ø 5…10 mm) with terminals for cable cross-sections 0.14…1.5 mm²