Type 8652

15 | 21

Visit product website 

7.4. Module-based safety shutdown (optional)

Connection designation

Optional:

Connections for module-based safety shutdown

Terminal 1 = valve unit 1, Terminal 2 = valve unit 2, ...

To use the switch-off function, connect the connection to a potential-free contact (mechanical switch or relay). The contact must be located

in the same control cabinet as the valve terminal, but limit cable length to a maximum of 2 m.

Electrical data

Connection

Pluggable spring-loaded terminal, 12-pin

Conductor cross-section (rigid or flexible) 0.14 mm²...1.5 mm² (AWG 26…16)

Required switching capacity of the contact

1.5 A / 24 V DC

7.5. Example configuration

The following illustration shows a network with the example of AirLINE Type 8652 with Industrial Ethernet version (PROFINET IO, EtherNet/

IP, Modbus TCP, EtherCAT, CC-Link IE Field Basic) as master valve terminal and various AirLINE Type 8652 with büS version as slave valve

terminals.

24 V DC, GND, CAN_L, CAN_H

Industrial Ethernet