NCP1653_06 datasheet(2/2 Pages) ONSEMI

2 / 2 page

NCP1653 – Compact PFC Controller is the ideal solution for continuous mode (CCM) PFC applications such as

ATX Power Supplies. This device enables the inclusion of a PFC front-end into an ATX power supply by simplifying

the design through integration (reduces part count) and providing a robust, cost effective front-end without

range switches.

NCP1562 – Active Clamp Controller is a highly integrated controller for the main stage (SMPS section) of

the ATX Power Supply. It can be used in applications with or without the PFC front-end. Thanks to its integrated

drivers, soft-switching, and accurate duty-cycle control amongst other unique features (such as soft-stop), the

NCP1562 significantly enhances the efficiency and ruggedness of the power stage without additional cost.

NCP1027 – Standby Controller is optimized for the standby/bias converter section of the ATX Power Supply. Its

highly integrated features and the integrated HV FET on the silicon makes it an ideal and cost-effective option.

The NCP1027 can deliver 15 W of standby power at high efficiency across the entire line conditions (85 V to

265 V AC).

NCP4330 – Post Regulator is a synchronous and more efficient post-regulator that replaces the Mag-Amp

solution for generating multiple-outputs in an ATX Power Supply. The NCP4330 can also lower the cost of the

overall solution while enabling this higher efficiency and makes it an ideal solution for achieving higher than

80% efficiencies.

300 W 80 PLUS® ATX Reference Design

A High-Efficiency GreenPoint™ Solution from ON Semiconductor

70%

80%

85%

90%

20%

50%

Loading (% of Rated Output Power)

Efficiency of the Power Supply

100%

230 Vac

115 Vac

The ON logo is a registered trademark of SCILLC.

NCP1653 bảng dữ liệu(PDF) 2 Page - ON Semiconductor