60

PRODUCT CATALOGUE - STEGO

COOLING

FILTER FAN PLUS – DC LINE

FPI/FPO 018 | up to 277 m³/h (176 x 176 mm)

TECHNICAL DATA

Axial fan, ball bearing

service life L10 at +40 °C (+104 °F): min. 80,000 h

fan body aluminium, rotor plastic

Connection

3-pole clamp for 2.5 mm², clamping torque 0.8 Nm max.

Casing, hood, flaps

plastic according to UL94 V-0, light grey;

UV light resistant according to UL746C (f1)

Enclosure cut-out

176 x 176+1 mm

Mounting frame

4 built-in ratchet braces for mounting

(6 notches for wall thickness 1 – 4 mm).

Additional use of screws possible if needed1.

Filter mat

ISO coarse 55% acc. to ISO 16890 (G3),

initial gravimetric arrestance 57 %

Filter material

synthetic fibre with progressive construction,

temperature resistant to +100 °C, self-extinguishing class F1,

moisture resistant to 100 % RH, reusable

Operating temperature

-25 to +70 °C (-13 to +158 °F)

Storage temperature

-40 to +70 °C (-40 to +158 °F)

Operating/Storage humidity

max. 90 % RH (non-condensing)

Protection type/Protection class

IP54 / I (earthed)

Environmental rating UL/NEMA

UL TYPE 12 / NEMA 12

Approvals

VDE, UL File No. E234324, EAC

Note

other voltages on request

1

Drilling marks for screw mounting are indicated on mounting frame.

AIRFLOW DIRECTION "IN": FILTER FAN FPI 018

Art. No.

Operating voltage

Air volume,

free flow

Air volume

with exit filter

Current consumption

Power

consumption

Average noise level

(DIN EN ISO 4871)

Depth in

enclosure

Weight

(approx.)

Filter mat

01872.2-30

DC 24 V

178 m³/h

156 m³/h

500 mA

12.0 W

63 dB (A)

117 mm

1.5 kg

G3

01872.1-30

DC 48 V

170 m³/h

147 m³/h

250 mA

12.0 W

63 dB (A)

117 mm

1.5 kg

G3

AIRFLOW DIRECTION "IN": EXIT FILTER FPI 118

Art. No.

Depth in enclosure

Weight (approx.)

Air outlet

11872.0-00

43 mm

0.4 kg

air-flap outlet technology

Filter fans are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components.

The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure

thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations

and protects electronic components from overheating.

The Filter Fan Plus series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree

of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the

application there are two systems that are available – the FPI or FPO system. The FPI system is a standard installation

with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow

direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located

in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of

an intake filter and exit filter fan. The Filter Fan Plus series may also be used outdoors with appropriate protective

measures or when equipped with weather proof accessories, e.g. Hose-proof Hood FFH 086.

> New air-flap outlet technology for

high airflow

> Easy mounting

> Protection type test/Environmental

rating by independent testing institutes

(VDE and UL)

> Two systems for optimal airflow

(FPI/FPO)

> Standard enclosure cut-out sizes

> One filter mat

Exit Filter FPI 118

Filter Fan FPI 018

Air-flaps

Filter mat

SYSTEM FPI

60TECHNICAL DATASHEET