DM0 MixRack Getting Started Guide

7

AP10972 Issue 3

3. Rear Panel

I/O Ports – 3x audio interface ports 128x128 channels each, independently

assigned. Fit one of the option cards available for system expansion, digital mic

splitting, recording or distributed audio networking. Refer to www.allen-heath.com for

a list of available option cards.

 iLive / GLD option cards (M-Dante, M-Waves, M-ES-V2, M-ACE, M-MADI) can be

used with dLive when fitted with the M-DL-ADAPT ‘letter-box’ adapter. This

provides a 64x64 48kHz interface with built-in Sample Rate Conversion.

Use the I/O screen to patch signals from or to the I/O Ports.

Audio Sync Lock – Indicates that the audio is sync locked to a valid clock

source. If this does not light up then check that the correct clock source is selected in

the MixRack / Audio / Audio Sync screen.

Word Clock I/O - BNC connectors for syncing from an external audio clock

or providing a clock to other devices. Use the MixRack / Audio / Audio Sync screen

to select the clock source.

Mains – Redundant power supplies with independent IEC sockets, On/Off

rocker switches and fuses.

 Heed the safety warnings printed on the panel.

A plastic P-clip cable clamp is provided to secure the mains cable. Slot the cable in

or lock it in place using a star Torx T20 screwdriver to refit the clamp around the cable.

Phones - Standard 1/4” jack socket and level control for the built-in

headphone amplifier. The output follows the PAFL selection.

Network –2x RJ45 Gigabit Ethernet ports. Connect a laptop or a wireless

router to use with dLive Editor or iOS apps. All devices on the network must have

compatible IP addresses.

Control Network

Secondary

ALLEN

Primary

Lnk/Act

Lnk/Act

GigE

Lnk/Act

HEATH

&

1

2

3

4

5

6

5

1

4

9

2

3

8

7

6