Pressure Meter PCE-P50

Pressure Meter PCE-P50 with RS232 interface and software, for overpressure, underpressure, differential pressure, suitable for air and

gases

Here you can see a professional differential pressure meter with the highest accuracy and best performance. With this differential manometer

you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure gauge is ideal for

use in industry, in service and in the laboratory. The device is particularly suitable for measuring non-corrosive media. The overload protection

is twice the measuring range. The 9 units that can be shown on the display make this differential manometer universally applicable for the

practitioner on site and saves laborious conversion of the measurement results (conversion table of the pressure units).

 

If you want to transfer the measurement data from the differential manometer to the computer, you need the optional software and the RS-

232 interface cable. The software runs in conjunction with the Windows® versions `95,` 98, `2000 and ME / XP (short info: pressure measuring

device with interface). The principle of absolute and differential pressure measurement is explained if you follow the link below: Principle of

absolute and differential pressure measurement. DIN ISO 9000 calibration certificates for the pressure gauges and corresponding accessories

are also available.

Software

The software for data transfer and the interface cable can optionally be ordered as a package. The differential manometer is connected to the

PC with the RS-232 cable. The software is installed from the CD. The pictures below give you an optical impression of the software. The

differential manometer transmits the respective measured values online to the PC.

The values determined on the differential manometer are plotted directly on the y-axis. The differential pressure values are indicated with "-" in

a field below the graphic (visible on the top left picture (in the red circle)). The measuring units can be changed to the desired unit both on the

differential manometer and in the software. All measured values are written in a data file and can be saved under any name on the hard disk of

the computer. Many customers also transfer the values to e.g. MS Excel for further analysis.

9 selectable units

Digital display of over, under (vacuum) or differential pressure

Min / Max memory

Data hold function

Backlit LCD display

Impact-resistant ABS housing

Auto-power-off function