Technical Specifications (pump)

Features

Single-Outlet

Multi-Outlet

Displacement

cm3 /rev

[in3/rev]

96 [5.86]

48 [2.93]

24 [1.46]

24 [1.46]

Maximum continuous

outlet pressure

bar [psi]

420 [6090]

Maximum intermittent

outlet pressure

bar [psi]

450 [6530]

Continuous speed range min-1 (rpm) 500 to 2200

Maximum speed

min-1 (rpm)

2600

Flow at maximum speed

(theoretical)

l/min

[US gal/min]

250 [66]

125 [33]

62.4 [16.5]

62.4 [16.5]

Weight (approximate)

kg [lb]

50 [110]

Rotation

Clockwise or counter-clockwise

Front mounting flange

SAE C 4-Bolt

(SAE D 4-Bolt for tandem)

Front input shaft

23 Tooth, 16/32 Pitch

Number of independent outlets

1 outlet

3 outlets

Outlet port(s)

1 inch code 62 ¾ inch code 62

½ inch code 62

½ inch code 62

Inlet port

2 inch code 61

Oil type

Mineral hydraulic fluids

Through drive and auxiliary mounting

options*

SAE A 2-Bolt, 9 or 11 Tooth

SAE B 2-Bolt, 13 or 15 Tooth

SAE C 4-Bolt, 14 or 17 Tooth

* On request

Tandem units are combinations of single and/or multi-outlet

pumps coupled together, each with the same operational limits as

individual pumps. Approximate weight is 110 kg [243 lbs].

Technical Specifications (controller)

Features

Value

Units

DC supply voltage range

9 to 36

V

Operating temperature range

-40 to +70

°C

Storage temperature range

-55 to +90

°C

Weight (approximate)

3

kg

IP ratings

IP67*

* IP67 rating is only valid when mating connectors are in place and

unused connector pins have sealing plugs installed.

The DPC30 controller can be used with a tandem unit.

Dimensions (pump)

Common dimensions (single and multi-outlet)

Single-outlet (left), Multi-outlet (right)

Tandem

Dimensions (controller)

Comprehensive technical literature is online at www.danfoss.com

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | January 2024

AI332064420016en-000201