ADC14C080 datasheet(4/17 Pages) NSC

tên linh kiện	ADC14C080

Giải thích chi tiết về linh kiện	14-Bit, 65/80/95/105 MSPS A/D Converter

PDF	17 Pages

Scroll/Zoom	100%

nhà sản xuất	NSC [National Semiconductor (TI)]

Trang chủ	http://www.national.com

Logo

4 / 17 page

Pin Descriptions and Equivalent Circuits (Continued)

Pin No.

Symbol

Equivalent Circuit

Description

13-19,

23-29

D0–D13

Digital data output pins that make up the 14-bit conversion

result. D0 (pin 13) is the LSB, while D13 (pin 29) is the MSB of

the output word. Output levels are CMOS compatible.

DRDY

Data Ready Strobe. The data output transition is synchronized

with the falling edge of this signal. This signal switches at the

same frequency as the CLK input.

ANALOG POWER

3, 8, 10,

Positive analog supply pins. These pins should be connected

to a quiet voltage source and be bypassed to AGND with 0.1

µF capacitors located close to the power pins.

4, 7, 9,

Exposed

Pad

AGND

The ground return for the analog supply.

DIGITAL POWER

Positive driver supply pin for the output drivers. This pin should

be connected to a quiet voltage source and be bypassed to

DRGND with a 0.1 µF capacitor located close to the power pin.

DRGND

The ground return for the digital output driver supply. This pins

should be connected to the system digital ground, but not be

connected in close proximity to the ADC’s AGND pins.

ADC14C080 bảng dữ liệu(PDF) 4 Page - National Semiconductor (TI)