Supply

Connector A

Operating voltage

8 V DC to 36 V DC

Pin 4

Unit power supply maximum current consumption (no external loads)

< 300 mA at 24 V

Unit power supply current consumption after controlled shutdown has occurred due to

the ignition being turned off

< 5 mA at 24 V

Fusing

Connector A

Unit power supply external protection fuse rating

3 A

Pin 4

Maximum total current of the device is 16 A. This includes the device current

consumption plus the current supplied to the outputs. Each output supply is rated max

16 A.

Output supply 3 + Output supply 4 must not exceed 16 A.

16 A

Pin 16, 23

Program Enable Pin

Connector A

Program enable high (program enabled)

> 6 V

Pin 6

Program enable low (program disabled)

< 2 V

When not used must

put to GND

Program enable pin pull-down resistance

33 k

Ω

Housing

Diecast aluminium

Dimensions

49 mm x 240 mm x 190 mm (H x W x D) / 1.46 " x 9.45 " x 7.48 " (H x W x D)

Weight

1.5 kg

Temperature

Operating temperature

-40 ˚C to +85 ˚C / -40 ˚F to +185 ˚F

Storage temperature

-40 ˚C to +85 ˚C / -40 ˚F to +185 ˚F

Protection Rating

IP67 (with mating connector)

Connectors

Mating Connector A - 23 pin TE connectivity 1-770680-1

Connector C - 35 pin TE connectivity 1-776164-1

M12, D-coded 4 pole socket

M12, A-coded 5 pole socket

Digital Inputs

Connector C

Digital inputs active high/active low

Pin 6, 9, 14, 15, 16, 22,

28, 31

High level voltage threshold for active high

> 6 V

Low level voltage threshold for active high

< 2 V

Analogue Voltage Inputs

Connector C

0 V to 5 V programmable voltage range

0 V to 5 V

Pin 7, 8, 17, 18, 19, 20,

29, 30

0 V to 10 V programmable voltage range

0 V to 10 V

0 V to 32 V programmable voltage range

0 V to 32 V

Voltage measurement resolution

12 bits

Voltage measurement accuracy

±1% FSD

Voltage measurement input resistance

≥ 30 k

Ω

Voltage measurement sampling rate

1 kHz

FSD = Full Scale Deflection

Technical Data

DSEControl®

DSEM643

055–236/07/21 (6)