Flexdip CYA112

Endress+Hauser

9

Installation

Mounting location

• Select the mounting location so that a sufficient distance from fixed installations is maintained,

and the sensor cannot be damaged even when the medium is moving.

• For fixed installation, the retaining point must be selected in a way that guarantees the proper

operation and maintenance of the assembly.

• The immersion tube must protrude over the retaining point by at least 100 mm (3.94 in).

Installation instructions

• Potential equalization must be implemented at the place of installation.

• All electrically conductive parts must be interconnected.

A0011037

 15

Retaining point (shown without splash protection cap). Dimensions: mm (in)

Mounting the sensor

Preparation:

1. Screw or glue the connecting pipe onto the immersion tube.

2. Where necessary, screw the sensor adapter onto the connection pipe.