Ceragel CPS71D and CPS71

Endress+Hauser

3

Communication and data processing CPS71D

Communication with the transmitter

Always connect digital sensors with Memosens technology to a transmitter with Memosens

technology. Data transmission to a transmitter for analog sensors is not possible.

Digital sensors can store measuring system data in the sensor. These include the following:

• Manufacturer data

– Serial number

– Order code

– Date of manufacture

• Calibration data

– Calibration date

– Slope at 25 °C (77 °F)

– Zero point at 25 °C (77 °F)

– Temperature offset

– Number of calibrations

– Serial number of the transmitter used to perform the last calibration

• Operating data

– Temperature application range

– pH application range

– Date of initial commissioning

– Maximum temperature value

– Hours of operation under extreme conditions

– Number of sterilizations

– Resistance of glass membrane

You can display the abovementioned data using the Liquiline CM44x, CM42 and Memobase Plus

CYZ71D.