PCF85063ATSLASHAAZ datasheet(44/55 Pages) NXP

44 / 55 page

NXP Semiconductors

PCF85063A

Tiny Real-Time Clock/calendar with alarm function and I2C-bus

15 Handling information

All input and output pins are protected against ElectroStatic Discharge (ESD) under normal handling. When

handling Metal-Oxide Semiconductor (MOS) devices ensure that all normal precautions are taken as described

in JESD625-A, IEC 61340-5 or equivalent standards.

16 Packing information

16.1 Tape and reel information

For tape and reel packing information, please see for

PCF85063AT

[4] and [5]

PCF85063ATL

[7]

PCF85063ATT

[6]

17 Soldering of SMD packages

This text provides a very brief insight into a complex technology. A more in-depth account of soldering ICs can

be found in Application Note AN10365 “Surface mount reflow soldering description”.

17.1 Introduction to soldering

Soldering is one of the most common methods through which packages are attached to Printed Circuit Boards

(PCBs), to form electrical circuits. The soldered joint provides both the mechanical and the electrical connection.

There is no single soldering method that is ideal for all IC packages. Wave soldering is often preferred when

through-hole and Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not

suitable for fine pitch SMDs. Reflow soldering is ideal for the small pitches and high densities that come with

increased miniaturization.

17.2 Wave and reflow soldering

Wave soldering is a joining technology in which the joints are made by solder coming from a standing wave of

liquid solder. The wave soldering process is suitable for the following:

• Through-hole components

• Leaded or leadless SMDs, which are glued to the surface of the printed circuit board

Not all SMDs can be wave soldered. Packages with solder balls, and some leadless packages which have

solder lands underneath the body, cannot be wave soldered. Also, leaded SMDs with leads having a pitch

smaller than ~0.6 mm cannot be wave soldered, due to an increased probability of bridging.

The reflow soldering process involves applying solder paste to a board, followed by component placement and

exposure to a temperature profile. Leaded packages, packages with solder balls, and leadless packages are all

reflow solderable.

Key characteristics in both wave and reflow soldering are:

• Board specifications, including the board finish, solder masks and vias

PCF85063A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 7.1 — 8 November 2023

44 / 55

PCF85063AT/AAZ bảng dữ liệu(PDF) 44 Page - NXP Semiconductors

PCF85063AT/AAZ bảng dữ liệu(HTML) 44 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

bảng dữ liệu tải về

Link URL