CMCP700HT

Extreme High Temperature Accelerometer

Features

•

480°F (250°C) Temperature Range

•

External Charge Amplified

•

2 Hz to 15 kHz Frequency Range

•

100 mV/g or 500 mV/g Sensitivities

•

Quick Fit Adapter for Easy Installation and Removal

•

Sealed to IP65

•

Braided Armor Cable Sensor Cable (Sensor to Charge Amp)

•

High Temperature Silicone Charge Amp Cable

Typical Applications

Trains, Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers,

Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.

Technical Performance

Mounted Base Resonance:

22 kHz (100 mV/g Output Model) and 18 kHz (500 mV/g Output Model)

Sensitivity:

100 mV/g and 500 mV/g

Frequency Response:

2 Hz to 10 kHz

±5%

(120 cpm to 600k cpm)

1.5 Hz to 12 kHz ±10%

(90 cpm to 720k cpm)

0.8 Hz to 15 kHz ±3dB

(48 cpm to 900k cpm)

Isolation:

Base Isolated

Measurement Range:

±80 g (100 mV/g Output Model) and ±16 g (500 mV/g Output Model)

Transverse Sensitivity:

Less than 5%

Electrical

Supply Voltage:

18-30 Vdc

Current Range:

0.5 mA to 8 mA

Bias Voltage:

10-12 Vdc

Electrical Noise:

0.1 mg max

Settling Time:

2 Second

Output Impedance:

200 Ohm max.

Case Isolation:

>108 Ohm at 500 Volt

Environmental

Operating Temperature Range:

-67 to 480°F (-55 to 250°C)

Sealing:

IP65

Maximum Shock:

5000 g

Approvals:

CE Approved

Mechanical

Case Material:

Stainless Steel

Sensing Element:

PZT/Compression

Mounting Torque:

5.9ft. lbs (8 Nm)

Weight:

4.4 Oz (139 gram)

Mounting:

Quick Fit Adapter with ¼”-28 and M8 Mounting Studs

Mating Connector:

Integral Cable with Flying Leads or 2-Pin MS 5015 Connector for -2P Version