M750000007 datasheet(64/129 Pages) SPANSION

64 / 129 page

Am75PDL191BHHa/Am75PDL193BHHa

February 6, 2004

ADV ANCE

I N FO RMAT I O N

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –55

°C to +125°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . . –40

°C to +85°C

Voltage with Respect to Ground

CCf, VCCs (Note 1) . . . . . . . . . . . . –0.5 V to +4.0 V

RESET# (Note 2) . . . . . . . . . . . . –0.5 V to +12.5 V

WP#/ACC . . . . . . . . . . . . . . . . . . –0.5 V to +10.5 V

All other pins (Note 1) . . . . . . –0.5 V to V

CC +0.5 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V.

Dur in g vo ltage tran sitions, inpu t or I/O pins may

overshoot V

SS to – 2.0 V for pe r iods of up to 2 0 ns.

Maximum DC voltage on input or I/O pins is V

CC +0.5 V.

See Figure 8. During voltage transitions, input or I/O pins

may overshoot to V

CC +2.0 V for periods up to 20 ns. See

Figure 9.

2. Minimum DC input voltage on pins RESET#, and

WP# / AC C is –0 .5 V. D u r i ng vo lt age trans itions,

WP#/ACC, and RESET# may overshoot V

SS to –2.0 V for

periods of up to 20 ns. See Figure 8. Maximum DC input

voltage on pin RESET# is +12.5 V which may overshoot

to +14.0 V for periods up to 20 ns. Maximum DC input

voltage on WP#/ACC is +9.5 V which may overshoot to

+12.0 V for periods up to 20 ns.

3. No more than one output may be shorted to ground at a

time. Duration of the short circuit should not be greater

than one second.

Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device. This

is a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this data sheet is not implied.

Ex posure of the d evice to absolute m aximum rating

conditions for extended periods may affect device reliability.

Figure 8.

Maximum Negative

Overshoot Waveform

Figure 9.

Maximum Positive

Overshoot Waveform

OPERATING RANGES

Industrial (I) Devices

Ambient Temperature (T

A) . . . . . . . . . –40°C to +85°C

CCf/VCCs Supply Voltages

CCf/VCCs for standard voltage range . . 2.7 V to 3.1 V

Operating ranges define those limits between which the

functionality of the device is guaranteed.

ESD IMMUNITY

Spansion Flash memory Multi-Chip Products (MCPs)

may contain component devices that are developed by

FASL LLC (“Spansion components”) and component

devices that are developed by a third party (‘third-party

components”).

Spansion components are tested and guaranteed to

the ESD immunity levels listed in the corresponding

Spansion Flash memory Qualification Database.

Third-party components are neither tested nor guaran-

teed by FASL LLC for ESD immunity. However, ESD

test results for third-party components may be avail-

able from the component manufacturer. Component

manufacturer contact information is listed in the Span-

sion MCP Qualification Report, when available.

The Spansion Flash memory Qualification Database

and Spansion MCP Qualification Report are available

from AMD and Fujitsu sales offices.

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

20 ns

+2.0 V

+0.5 V

20 ns

2.0 V

M750000007 bảng dữ liệu(PDF) 64 Page - SPANSION

M750000007 bảng dữ liệu(HTML) 64 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL