AP2316 datasheet(5/12 Pages) BCDSEMI

5 / 12 page

600mA LOW DROPOUT LINEAR REGULATOR

AP1117M

Data Sheet

600mA LOW DROPOUT LINEAR REGULATOR

AP2316

Apr. 2007 Rev. 1. 1

BCD Semiconductor Manufacturing Limited

Recommended Operating Conditions

Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device.

These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated

under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods

may affect device reliability.

Note 2: Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifica-

tions do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a

function of the maximum junction temperature, TJ(max), the junction-to-ambient thermal resistance, θJA, and the ambient tem-

perature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD(max)=(TJ(max) -

TA)/θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will

go into thermal shutdown.

Parameter

Symbol

Value

Unit

Input Voltage

VIN

Operating Junction Temperature

150

Storage Temperature Range

TSTG

-65 to 150

Lead Temperature (Soldering, 10sec)

TLEAD

260

Thermal Resistance (Note 2)

SOT-89-3

165

oC/W

ESD (Human Body Model)

ESD

3500

ESD (Machine Model)

ESD

350

Parameter

Symbol

Min

Max

Unit

Input Voltage

VIN

Operating Junction Temperature Range

-40

125

Absolute Maximum Ratings (Note 1)

AP2316 bảng dữ liệu(PDF) 5 Page - BCD Semiconductor Manufacturing Limited

AP2316 bảng dữ liệu(HTML) 5 Page - BCD Semiconductor Manufacturing Limited

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

bảng dữ liệu tải về

Link URL