| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
WM8985GEFL/R bảng dữ liệu(PDF) 77 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8985GEFL/R bảng dữ liệu(HTML) 77 Page - Wolfson Microelectronics plc |
|
77 / 118 page ![]() Pre-Production WM8985 w PP, Rev 3.5, January 2007 77 REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION 0 MONO 0 Selects between stereo and mono device operation: 0 = Stereo device operation 1 = Mono device operation. Data appears in ‘left’ phase of LRC only. 1 ALRSWAP 0 Controls whether ADC data appears in ‘right’ or ‘left’ phases of LRC clock: 0 = ADC left data appear in ‘left’ phase of LRC and right data in 'right' phase 1 = ADC left data appear in ‘right’ phase of LRC and right data in 'left' phase 2 DLRSWAP 0 Controls whether DAC data appears in ‘right’ or ‘left’ phases of LRC clock: 0 = DAC left data appear in ‘left’ phase of LRC and right data in 'right' phase 1 = DAC left data appear in ‘right’ phase of LRC and right data in 'left' phase 4:3 FMT 10 Audio interface Data Format Select: 00 = Right Justified 01 = Left Justified 10 = I2S format 11 = DSP/PCM mode 6:5 WL 10 Word length 00 = 16 bits 01 = 20 bits 10 = 24 bits 11 = 32 bits (see note) LRC clock polarity 0 = normal 1 =inverted 7 LRP 0 DSP Mode – mode A/B select 0 = MSB is available on 2nd BCLK rising edge after LRC rising edge (mode A) 1 = MSB is available on 1 st BCLK rising edge after LRC rising edge (mode B) R4 (04h) Audio Interface Control 8 BCP 0 BCLK polarity 0 = normal 1 = inverted R5 0 LOOPBACK 0 Digital loopback function 0 = No loopback 1 = Loopback enabled, ADC data output is fed directly into DAC data input. Table 43 Audio Interface Control Note: Right Justified Mode will only operate with a maximum of 24 bits. If 32-bit mode is selected the device will operate in 24-bit mode. AUDIO INTERFACE CONTROL The register bits controlling audio format, word length and master / slave mode are summarised below. Register bit MS selects audio interface operation in master or slave mode. In Master mode BCLK, and LRC are outputs. The frequency of BCLK in master mode can be controlled with BCLKDIV. The frequencies of BCLK and LRC are also controlled by MCLKDIV. The LRC sample rate is set to the required values by MCLKDIV and the BCLK rate will be set accordingly to provide sufficient BCLKs for that chosen sample rate. These clocks are divided down versions of master clock. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |