PI74FCT16244T/162244T

16-Bit Buffer/Line Drivers

3

PS2031L

02/26/07

Parameters

Description

Min.

Max.

Units

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

V

Input LOW Voltage

Guaranteed Logic LOW Level

0.8

V

Input HIGH Current

1

μA

Input HIGH Current

1

μA

Input LOW Current

–1

μA

Input LOW Current

–1

μA

High Impedance

1

μA

Output Current

–1

μA

Clamp Diode Voltage

–0.7

–1.2

V

Short Circuit Current

–80

–140

–320

mA

Output Drive Current

–50

–180

mA

Input Hysteresis

100

mV

Storage Temperature ........................................................ –65°C to +150°C

Ambient Temperature with Power Applied ......................... –40°C to +85°C

Supply Voltage to Ground Potential (Inputs & Vcc Only) ...–0.5V to +7.0V

Supply Voltage to Ground Potential (Outputs & D/O Only) –0.5V to +7.0V

DC Input Voltage ................................................................–0.5V to +7.0V

DC Output Current .......................................................................... 120mA

Power Dissipation ............................................................................... 1.0W

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional

operation of the device at these or any other conditions

above those indicated in the operational sections of this

specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may

affect reliability.

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at Vcc = 5.0V, +25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

07-0059