ST72F324J2T3 datasheet(16/163 Pages) STMICROELECTRONICS

tên linh kiện	ST72F324J2T3

Giải thích chi tiết về linh kiện	5V RANGE 8-BIT MCU WITH 8 TO 32K FLASH, 10-BIT ADC, 4 TIMERS, SPI, SCI INTERFACE

PDF	163 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

16 / 163 page

ST72324

16/163

Legend: x=undefined, R/W=read/write

Notes:

1. The contents of the I/O port DR registers are readable only in output configuration. In input configura-

tion, the values of the I/O pins are returned instead of the DR register contents.

2. The bits associated with unavailable pins must always keep their reset value.

3. The Timer A Input Capture 2 pin is not available (not bonded).

– In Flash devices:

The TAIC2HR and TAIC2LR registers are not present. Bit 5 of the TACSR register (ICF2) is forced

by hardware to 0. Consequently, the corresponding interrupt cannot be used.

4. The Timer A Output Compare 2 pin is not available (not bonded).

– The TAOC2HR and TAOC2LR Registers are write only, reading them will return undefined values.

Bit 4 of the TACSR register (OCF2) is forced by hardware to 0. Consequently, the corresponding in-

terrupt cannot be used.

Caution: The TAIC2HR and TAIC2LR registers and the ICF2 and OCF2 flags are not present in Flash de-

vices but are present in the emulator. For compatibility with the emulator, it is recommended to perform a

dummy access (read or write) to the TAIC2LR and TAOC2LR registers to clear the interrupt flags.

ST72F324J2T3 bảng dữ liệu(PDF) 16 Page - STMicroelectronics