công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

CRX14 bảng dữ liệu(PDF) 13 Page - STMicroelectronics

tên linh kiện CRX14
Giải thích chi tiết về linh kiện  Low Cost ISO14443 type-B Contactless Coupler Chip with Anti-Collision, CRC Management and Anti-Clone Function
PDF  40 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  STMICROELECTRONICS [STMicroelectronics]
Trang chủ  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

CRX14 bảng dữ liệu(HTML) 13 Page - STMicroelectronics

Back Button CRX14 Datasheet HTML 9Page - STMicroelectronics CRX14 Datasheet HTML 10Page - STMicroelectronics CRX14 Datasheet HTML 11Page - STMicroelectronics CRX14 Datasheet HTML 12Page - STMicroelectronics CRX14 Datasheet HTML 13Page - STMicroelectronics CRX14 Datasheet HTML 14Page - STMicroelectronics CRX14 Datasheet HTML 15Page - STMicroelectronics CRX14 Datasheet HTML 16Page - STMicroelectronics CRX14 Datasheet HTML 17Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 13 / 40 page
background image
13/40
CRX14
Figure 7. I²C Bus Protocol
I²C Memory Addressing
To start up communication with the CRX14, the
bus master must initiate a START condition. Then,
the bus master sends 8 bits (with the most signifi-
cant bit first) on the Serial Data line, SDA. These
bits consist of the Device Select Code (7 bits) plus
a RW bit.
According to the I²C bus definition, the seven most
significant bits of the Device Select Code are the
Device Type Identifier. For the CRX14, these bits
are defined as shown in Table 6.
The 8th bit is the Read/Write bit (RW). It is set to
‘1’ for I²C Read, and to ‘0’ for I²C Write operations.
If the data sent by the bus master matches the De-
vice Select Code of a CRX14 device, the corre-
sponding device returns an acknowledgment on
the SDA bus during the 9th bit time.
The CRX14 devices whose Device Select Codes
do not correspond to the data sent, generate a No-
ACK. They deselect themselves from the bus and
go into stand-by mode.
CRX14 I²C Write Operations
The bus master sends a START condition, fol-
lowed by a Device Select Code and the R/W bit set
to ’0’. The CRX14 that corresponds to the Device
Select Code, acknowledges and waits for the bus
master to send the Byte address of the register
that is to be written to. After receipt of the address,
the CRX14 returns another ACK, and waits for the
bus master to send the data Bytes that are to be
written.
In the CRX14 I²C Write mode, the bus master may
sends one or more data Bytes depending on the
selected register.
The CRX14 replies with an ACK after each data
Byte received. The bus master terminates the
transfer by generating a STOP condition.
SCL
SDA
SCL
SDA
SDA
START
CONDITION
SDA
INPUT
SDA
CHANGE
AI00792
STOP
CONDITION
1
23
7
89
MSB
ACK
START
CONDITION
SCL
1
23
7
89
MSB
ACK
STOP
CONDITION



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com