| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
VCTA25201B-R33MS6 bảng dữ liệu(PDF) 13 Page - Richtek Technology Corporation |
|
|
|||||||||||||||||||||||||||||
VCTA25201B-R33MS6 bảng dữ liệu(HTML) 13 Page - Richtek Technology Corporation |
|
13 / 50 page ![]() RTQ2134-QA Copyright © 2022 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation. DSQ2134-QA-02 May 2022 www.richtek.com 13 Parameter Symbol Test Conditions Min Typ Max Unit Error Rate of DVS Slew Rate VIN = 3.7V, VOUT = 0.6V to 1.2V −20 -- 20 % Digital Output Pin : INT Output low level, ISOURCE = 2mA -- -- 0.4 V Push-pull, ISINK = 2mA 1.6 -- VIO V Digital Output Pin : SDA Output low level Resistor -- -- 40 I2C Speed -- -- 3.4 MHz Hold Time (Repeated) Start Condition. After this Period, the First Clock Pulse is Generated tHD;STA Fast mode (Note5) 0.6 -- -- s Low Period of the SCL Clock tLOW Fast mode (Note5) 1.3 -- -- s High Period of the SCL Clock tHIGH Fast mode (Note5) 0.6 -- -- s Set-Up Time for a Repeated START Condition tSU;STA Fast mode (Note5) 0.6 -- -- s Data Hold Time tHD;DAT Fast mode (Note5) 0 -- 0.9 s Data Set-Up Time tSU;DAT Fast mode (Note5) 100 -- -- ns Set-Up Time for STOP Condition tSU;STO Fast mode (Note5) 0.6 -- -- s Bus Free Time between a STOP and START Condition tBUF Fast mode (Note5) 1.3 -- -- s Rising Time of both SDA and SCL Signals tR Fast mode (Note5) 20 -- 300 ns Falling Time of both SDA and SCL Signals tF Fast mode (Note5) 20 -- 300 ns SDA Output Low Sink Current IOL SDA Voltage = 0.4V (Note5) 2 -- -- mA Detect SDA Low Timeout tTIMEOUT Fast/High speed mode (Note5) -- 30 -- ms Note 1. Stresses beyond those liste d under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may affect device reliability. Note 2. θJA is measured in the natural convection at TA = 25°C on a Four-layer Richtek Evaluation Board. θJC is measured at the top of the package. Note 3. Devices are ESD sensitive. Handling precautions are recommended. Note 4. The device is not guaranteed to function outside its operating conditions. Note 5. Guaranteed by design. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |